Kyosho Fazer D2 Nissan Silvia S13 Tuned Purple 1:10 Drift Readyset

Description

Nissan's S13 Silvia is the car that taught a generation to drift: front engine, rear-wheel drive, light and easy to throw sideways. Kyosho has recreated a tuned street version as a 1:10 electric drift car on the rear-wheel-drive Fazer D2 chassis, and it arrives as a factory-built Readyset. Add a battery, a charger and four AA cells and it is ready to drift.

The Fazer D2 is built for drifting from the ground up. The receiver has a gyro built in that helps with counter-steer and throttle, so a newcomer can hold a slide from the first battery. The chassis is still a proper hobby-grade drift car underneath, with adjustable geometry and a long list of upgrade parts for when you want to tune it.

Body highlights

• Ultra Scale Body Plus: factory painted in purple with aggressive drift-inspired aero parts, and no mounting holes drilled through the body.
• Exclusive headlight covers and grille decals give it a sharp, aggressive front end.
• LED-compatible light buckets front and rear. Add Kyosho's 97054 LED Light Units (sold separately) for working lights.
• Officially licensed fifteen52 Turbomac two-piece wheels with adjustable 5mm, 7mm and 9mm offsets.
• Stealth body mounts hide the body posts. Conventional pin-type mounts, compatible with earlier Fazer bodies, are also included.
• Dummy brake calipers and discs on the wheel hubs for extra scale detail.

Fazer D2 RWD drift chassis

• Rear-wheel drive with a spool rear axle for smooth, controllable drifts.
• Syncro KRG-331D receiver with built-in gyro, with separate steering-gain and throttle-gain dials.
• KS4072-06W steering servo, chosen for drifting.
• G22 brushed motor, high mounted for gentle roll characteristics, with a gear cover to keep grit out of the drivetrain.
• Motor mount with set holes for correct gear mesh, plus slotted holes for 48P 16–37T pinions.
• Oil-filled shocks pre-tuned with drift pistons, springs and oil. Extra tuning pistons are included.
• Long-span front double wishbones for plenty of steering angle. Caster, Ackermann and roll centre are adjustable.
• Split resin chassis with a variable wheelbase (240–273mm), so most Fazer series bodies fit.
• ESC mounted at the rear on a tray that removes with a single screw.
• Takes most batteries, from shorty LiPo packs to straight packs. LCG packs need a 5–6mm spacer.

Specification

• Scale: 1:10
• Chassis: Fazer D2 (FZD2), rear-wheel drive
• Length (with body): 484mm
• Width: 204mm body (excluding mirrors), 208mm chassis
• Height: 136mm
• Wheelbase: 260mm (adjustable 240–273mm)
• Track: 172mm front, 180mm rear
• Tyres: 63 × 24mm
• Gear ratio: 9.1:1
• Weight: approx. 1,450g
• Motor: G22 brushed
• Radio: Syncro KT-231P+ transmitter, KRG-331D gyro receiver
• Item code: 34503T1B · EAN 4548565529940

In the box

• Completed chassis with radio installed
• Factory-painted and decorated body
• Syncro KT-231P+ transmitter
• 1.5mm / 2.0mm hex wrenches and a small cross wrench
• Setting-change parts

Required to run

• Drive battery (7.2V Ni-MH recommended) and a compatible charger
• 4 × AA batteries for the transmitter

Pre-order

Kyosho's release date for this model is October 2026. Order now to secure one from the first shipment. We will dispatch as soon as stock lands.